In order to rescue your controller you will need to follow these instructions:

==============================================================================

SRS 100 Instructions:
---------------------

Rescue software to be used to break into the SRS 100 when the controller will not boot.


1	Shut down management software (Com 1 must be free)

2	Press enter and any key on the controller simultaneously and repeatedly press return until OK appears on screen

3	Type “fu” Press return several times

4	When message appears on the pc screen Referring to the rom     Type “go” press return

5	On pc screen the message should appear 1ok 2 ok ltcbs ok

On completion of the rescue the following message will appear on the controller screen

	RESCUE
	RESCUE MODE
	PLEASE UPLOAD
	SYSTEM SETTINGS
	THEN UPLOAD ALL

Note 
1= ic1 2=ic5 ltcbs= light, clock, battery and serial no ok= good r=retrying (bad)



These instructions are also incuded in the Intellec Rescue Program extracted directory
--------------------------------------------------------------------------------------