Intellec Rescue Program V1.01
-----------------------------

 

1) Connect serial cable to intellec making sure the serial cable is connected to comm port 1 on your PC.

2) Run "RESI.EXE"  a dos program

3) Press a key on the intellec

4) Wait for "broken in rom" to appear. If nothing appears turn off intellec with transport switch and turn on again whilst still connected.

5) Wait until text has finished.

6) Type "FU" then press "Enter".

7) Wait untill all flash pages have downloaded & "Finished" is displayed then press "Enter".

8) Wait for text to finish & then type "GO" then press "Enter".

9) Close Program, your intellec should display "New Rescue".

10) Start Intellec MS

11) Open SRS Technology Client

12) Upload "system settings"

13) Upload "ALL"

14) Intellec is recovered.

These instructions can also be found in the SRS Intellec Rescue Programs extracted directory