Pull cord

1

Info

PULL is a completely wireless pullcord unit for use with one of the receivers, e.g. care phone and/or the InfoPager. Just attach the unit to the wall and it is ready, without any cabling.

When someone pulls the cord, the unit will immediately transmit a radio signal to the receiver. The LED will indicate the transmission and change colour to green when it receives the acknowledgment from the receiver.

PULL is a completely wireless pullcord unit for use with one of the receivers, e.g. care phone and/or the InfoPager. Just attach the unit to the wall and it is ready, without any cabling.
When someone pulls the cord, the unit will immediately transmit a radio signal to the receiver. The LED will indicate the transmission and change colour to green when it receives the acknowledgment from the receiver. The unit is powered from a Lithium CR2430 battery which will last for several years when it is used a few times per day. PULL may also be powered from 12-24 volts of central power.

Associated / Complimentary products

1 Neo GSM Care Phone
The Neo GSM Care Phone is a compact, lightweight and intelligent device offer...
10 Info Pager - activated by emergency alarms and sensors
Possum provides solutions for the activation of an InfoPager by means of a pe...
27 Enhanced Telecare
Possum’s Enhance Telecare system offers vulnerable people complete ...
4 Neo Care Phone
The Neo Care Phone provides vulnerable people with the security and confidenc...
6 The Neo M-Care Phone
Providing peace of mind inside and outside the property The portable and lig...
2 Possum Info Pager 2nd Generation
We have listened to our customer feedback and further developed our technolog...

Specifications

To allow installations in places with high humidity such as bathrooms, the electronic parts have been lacquered. The pullcord PULL uses the EU recommended frequency (869.2 MHz) dedicated for social alarms. This means that there is a very small chance of interfering sources. That is not the case for triggers using 433 and 868 MHz frequencies.

PULL complies with all European requirements for LVD, EMC and R&TTE directives.

To allow installations in places with high humidity such as bathrooms, the electronic parts have been encapsulated. The pullcord PULL uses the EU recommended frequency (869.2 MHz) dedicated for social alarms. This means that there is a very small chance of interfering sources. That is not the case for triggers using 433 and 868 MHz frequencies.
PULL complies with all European requirements for LVD, EMC and R&TTE directives.
Radio
869.200-869.250 MHz frequency dedicated for social alarms
Both sending and receiving capabilities
Adjustable output power
Dimensions

Radio

  • 869.200-869.250 MHz frequency dedicated for social alarms
  • Both sending and receiving capabilities
  • Adjustable output power

 Dimensions: L82 mm x W 85mm x D 20mm Cord length 480mm

Power: 1 x Lithium CR2430 3V battery included or optional 12-24 volts DC central power.

Supplied With

  • Pull Unit
  • Surface mounting frame

Required

Installation, programming

catalogue

Download our most recent brochure here

Flyer(298Kb) User Guide(551Kb)